Unit converters
All-in-One Unit Converter
Pick a measurement category and convert with the same factors used on each dedicated converter page.
Read as 67.375 in
1 ft = 30.48 cm · 1 in = 2.54 cm
Common conversions
These examples use the same factors as the converter. Choose one to fill the fields.
| From | To | Result | Use example |
|---|---|---|---|
| 1 in | Centimeter (cm) | 2.54 cm | |
| 1 ft | Meter (m) | 0.3048 m | |
| 1 yd | Meter (m) | 0.9144 m | |
| 1 mi | Kilometer (km) | 1.609344 km | |
| 5' 7-3/8" | Inch (in) | 67.375 in | |
| 1 m | Foot (ft) | 3.2808399 ft |
Conversion reference
Factors are relative to the meter. Rounded figures in the result use the decimal-place control.
| Unit | Symbol | Relation |
|---|---|---|
| Millimeter (mm) | mm | 1 mm = 0.001 m |
| Centimeter (cm) | cm | 1 cm = 0.01 m |
| Meter (m) | m | Base unit |
| Kilometer (km) | km | 1 km = 1,000 m |
| Inch (in) | in | 1 in = 0.0254 m |
| Foot (ft) | ft | 1 ft = 0.3048 m |
| Yard (yd) | yd | 1 yd = 0.9144 m |
| Mile (mi) | mi | 1 mi = 1,609.344 m |
| Feet and inches | ft-in | Interpreted in inches. 1 in = 0.0254 m |
Conversion standards and methodology
Review unit conventions, formula scope, and practical precision limits.
Official metrology standards
- NIST
The International System of Units
U.S. presentation of the SI based on defining constants.
NIST SP 330 (2019)
Public reference. Source record checked 2026-11-17.
- BIPM
SI Brochure
Current SI definitions, prefixes, and unit conventions.
SI Brochure, 9th edition, version 4.01 (June 2026)
Public reference. Source record checked 2026-11-17.
- NIST
Guide for the Use of SI
Conversion tables and rounding guidance. This edition predates the 2019 SI redefinition; consult SP 330 and BIPM for current SI definitions.
NIST SP 811 (2008), Appendix B, especially B.7–B.9
Public reference. Source record checked 2026-11-17.
- NIST
SI conversion factors for general use
General-use conversion reference; printed rounded factors are not substitutes for full exact definitions.
NIST SP 1038 (2006)
Public reference. Source record checked 2026-11-17.
- ISO
Quantities and units — General
Quantity and unit terminology and notation.
ISO 80000-1:2022; consult applicable parts of the ISO/IEC 80000 series
Public catalogue scope; full standard requires licensed access. Source record checked 2026-11-17.
- IEEE / ASTM
American National Standard for Metric Practice
Metric engineering practice reference.
IEEE/ASTM SI 10-2016
Public catalogue identification; full standard not reproduced or audited. Source record checked 2026-11-17.
Conversion formulas and constants
How to apply the methodology
Identify the convention
Choose the quantity and confirm the exact input and output unit definitions.
Apply the appropriate relationship
Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.
Review precision and context
Check the result against the input precision, selected convention, and any application-specific rules.
Scale through a common base
b = x × f₁; y = b / f₂
- x
- Input value
- b
- Value in the category's common base unit
- y
- Output value
- f₁, f₂
- Base units per input/output unit
- Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
- Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2Precision and rounding rules
- Compute through the category base using unformatted values; round only the displayed result.
- Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
- The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
- NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.
Methodology questions
Can every conversion use multiplication alone?
Scale conversions can. Absolute temperatures also require offsets; inverse fuel-economy measures and slope representations need their own transformations.
Does an exact definition guarantee every displayed digit is accurate?
No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.
How it works
The all-in-one converter is the same engine as the individual pages. You pick a category, then convert only among units in that category. A length result matches the length page, a temperature result uses the same offsets, and a slope result uses the same tangent.
Length and mass follow the 1959 international yard and pound. Temperature uses the 273.15 K offset. Data storage and data transfer speed keep decimal and binary prefixes apart. Fuel economy treats liters per 100 kilometers as an inverse. Force and torque use the pound-force defined from standard gravity.
Frequency uses 1 Hz = 60 RPM = 2π rad/s. Cooking converts volume only and keeps US and imperial units apart. Typography starts from a 16 px root font size, which you can change after you select that category. Currency is not included. Units from two categories, such as feet and pounds, do not convert into each other.
Formulas
Each line uses the same formula as that category’s own page. Temperature adds an offset, fuel economy inverts liters per 100 kilometers, and slope uses a tangent.
- Length: 1 ft = 30.48 cm · 1 in = 2.54 cm
- Area: 1 ft² = 0.09290304 m²
- Volume: 1 US gal = 3.785411784 L
- Weight and mass: 1 lb = 0.45359237 kg
- Temperature: °C = (°F − 32) × 5/9
- Speed: 1 mph = 1.609344 km/h
- Time: 1 h = 60 min
- Pressure: 1 psi = 6.894757293168 kPa
- Data storage: 1 GB = 0.931322574615 GiB
- Fuel economy: L/100 km = 235.214583333333 ÷ mpg US
- Concrete volume: 1 yd³ = 27 ft³
- Force: 1 lbf = 4.448221615261 N
- Torque: 1 ft·lbf = 1.355817948331 N·m
- Density: 1 lb/ft³ = 16.01846337396 kg/m³
- Angle: 1 ° = 0.01745329252 rad
- Slope / grade: percent grade = rise/run × 100
- Flow rate: 1 GPM US = 3.785411784 L/min
- Power: 1 hp = 745.69987158227 W
- Energy: 1 kWh = 3,600,000 J
- Stress / load: 1 ksi = 6.894757293168 MPa
- Data transfer speed: 1 Mbps = 0.125 MB/s
- Frequency: RPM = Hz × 60
- Cooking: 1 US cup = 236.5882365 mL
- Typography: rem = px ÷ 16
Worked examples
1 in = 2.54 cm
1 in = 2.54 cm
32 °F = 0 °C
°C = (°F − 32) × 5/9
FAQ
Does the all-in-one converter match the individual pages?
Yes. It calls the same unit tables. A result here is the result on that category’s page.
Can it convert feet to kilograms?
No. Each conversion stays inside one category. Change the category when you want a different kind of unit.
Does it convert currency?
No. Currency needs a changing rate, and this tool does not include one.
Does typography use a fixed root font size?
It starts at 16 px. After you select typography, the root font size field changes em, rem, and percent. Pixels, points, picas, and the other absolute CSS units stay fixed.
Factor sources
- Each category uses the factor table on its own converter page. Length and mass follow the 1959 international yard and pound. Temperature uses the 273.15 K offset. Data storage keeps decimal and binary prefixes apart. Fuel economy treats liters per 100 kilometers as an inverse.
- Force, torque, and energy use the pound-force 4.4482216152605 N and the foot-pound 1.3558179483314004 J. Mechanical horsepower is 550 ft·lbf/s and metric horsepower is 735.49875 W. BTU and the International Table calorie are labeled separately from the thermochemical calorie. Slope uses the tangent of the angle from horizontal.
- Data transfer speed uses 8 bits per byte, SI decimal prefixes, and IEC binary prefixes. Frequency uses 1 Hz = 60 RPM = 2π rad/s. Cooking volumes use the US gallon 3.785411784 L and the UK gallon 4.54609 L, and they do not convert volume to weight. Typography uses CSS absolute units and a root font size that starts at 16 px.