Numeravo

Numeravo

Smart calculators

Unit converters

Volume Converter

Convert volume with US and imperial liquid measures kept separate, plus cubic feet, cubic yards, and board feet.

1 US gal = 3.785411784 L

The imperial cup here is 10 imperial fluid ounces, half an imperial pint. The United Kingdom does not define a statutory cup; many metric recipes use 250 mL, which is 0.25 L.

Common conversions

These examples use the same factors as the converter. Choose one to fill the fields.

FromToResultUse example
1 US galLiter (L)3.78541178 L
1 imp galLiter (L)4.54609 L
1 yd³Cubic foot (ft³)27 ft³
1 ft³Liter (L)28.31684659 L
1 bd ftCubic inch (in³)144 in³
1 US cupMilliliter (mL)236.5882365 mL

Conversion reference

Factors are relative to the cubic meter. Rounded figures in the result use the decimal-place control.

UnitSymbolRelation
Milliliter (mL)mL1 mL = 0.000001 m³
Liter (L)L1 L = 0.001 m³
Cubic inch (in³)in³1 in³ = 0.000016387064 m³
Cubic foot (ft³)ft³1 ft³ = 0.028316846592 m³
Cubic yard (yd³)yd³1 yd³ = 0.764554857984 m³
Cubic meter (m³)m³Base unit
Board foot (bd ft)bd ft1 bd ft = 0.002359737216 m³
US fluid ounceUS fl oz1 US fl oz = 0.00002957353 m³
US cup (8 US fl oz)US cup1 US cup = 0.000236588237 m³
US pintUS pt1 US pt = 0.000473176473 m³
US quartUS qt1 US qt = 0.000946352946 m³
US gallonUS gal1 US gal = 0.003785411784 m³
Imperial fluid ounceimp fl oz1 imp fl oz = 0.000028413063 m³
Imperial cup (10 imp fl oz)imp cup1 imp cup = 0.000284130625 m³
Imperial pintimp pt1 imp pt = 0.00056826125 m³
Imperial quartimp qt1 imp qt = 0.0011365225 m³
Imperial gallonimp gal1 imp gal = 0.00454609 m³

Conversion standards and methodology

Review unit conventions, formula scope, and practical precision limits.

Official metrology standards
  • NIST

    The International System of Units

    U.S. presentation of the SI based on defining constants.

    NIST SP 330 (2019)

    Public reference. Source record checked 2026-11-17.

  • NIST

    Weighing and measuring devices

    Commercial device requirements and measurement tables. Applicability depends on adoption by the responsible authority.

    NIST Handbook 44 (2026), including Appendix C

    Public reference. Source record checked 2026-11-17.

  • NIST

    Uniform laws and regulations

    Model labeling provisions; determine local adoption and product-specific requirements.

    NIST Handbook 130 (2026), IV.A, Uniform Packaging and Labeling Regulation

    Public reference. Source record checked 2026-11-17.

  • NIST

    Guide for the Use of SI

    Conversion tables and rounding guidance. This edition predates the 2019 SI redefinition; consult SP 330 and BIPM for current SI definitions.

    NIST SP 811 (2008), Appendix B, especially B.7–B.9

    Public reference. Source record checked 2026-11-17.

Conversion formulas and constants

How to apply the methodology

  1. Identify the convention

    Choose the quantity and confirm the exact input and output unit definitions.

  2. Apply the appropriate relationship

    Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.

  3. Review precision and context

    Check the result against the input precision, selected convention, and any application-specific rules.

Scale through a common base

b = x × f₁; y = b / f₂

x
Input value
b
Value in the category's common base unit
y
Output value
f₁, f₂
Base units per input/output unit
  • Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
  • Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2

Liquid volume definitions

1 US gal = 231 in³ = 3.785411784 L; 1 imp gal = 4.54609 L; 1 L = 0.001 m³

L
Liter
US gal
U.S. liquid gallon
imp gal
Imperial gallon
  • These relationships are exact. U.S. dry measures are separate units.
  • Cube a length factor when converting cubic units.
LaTeX equation
1\,\mathrm{gal}_{US}=231\,\mathrm{in}^3=3.785411784\,\mathrm{L},\quad 1\,\mathrm{gal}_{imp}=4.54609\,\mathrm{L}
Precision and rounding rules
  • Compute through the category base using unformatted values; round only the displayed result.
  • Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
  • The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
  • NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.

Methodology questions

Are all gallons the same?

No. U.S. liquid, U.S. dry, and imperial gallons are distinct units. Select the convention explicitly.

Does an exact definition guarantee every displayed digit is accurate?

No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.

How it works

Volume here mixes cubic length with liquid measures. The liter is exactly 0.001 m³. A US gallon is exactly 231 cubic inches, which NIST publishes as 3.785411784 L. A UK gallon is exactly 4.54609 L under the UK Weights and Measures Act 1985.

People use it for fuel, containers, concrete order of magnitude, and recipes. US cups, pints, quarts, and fluid ounces are fractions of the US gallon. Imperial measures are fractions of the UK gallon and are labeled separately.

A board foot is the lumber volume 1 ft × 1 ft × 1 in, exactly 144 cubic inches. It is a volume, not a grade or a price. One cubic yard is exactly 27 cubic feet.

Formulas

These conversions multiply by an exact factor of the cubic meter. The relations below are read from the unit table.

  • 1 mL = 0.000001 m³
  • 1 L = 0.001 m³
  • 1 in³ = 0.000016387064 m³
  • 1 ft³ = 0.028316846592 m³
  • 1 yd³ = 0.764554857984 m³
  • Base unit
  • 1 bd ft = 0.002359737216 m³
  • 1 US fl oz = 0.00002957353 m³
  • 1 US cup = 0.000236588237 m³
  • 1 US pt = 0.000473176473 m³
  • 1 US qt = 0.000946352946 m³
  • 1 US gal = 0.003785411784 m³
  • 1 imp fl oz = 0.000028413063 m³
  • 1 imp cup = 0.000284130625 m³
  • 1 imp pt = 0.00056826125 m³
  • 1 imp qt = 0.0011365225 m³
  • 1 imp gal = 0.00454609 m³

Worked examples

  1. 1 US gal = 3.78541178 L

    1 US gal = 3.785411784 L

  2. 1 imp gal = 4.54609 L

    1 imp gal = 4.54609 L

FAQ

Are the US gallon and the UK gallon the same?

No. A US gallon is 3.785411784 L. A UK gallon is 4.54609 L. The page labels every cup, pint, quart, fluid ounce, and gallon as US or imperial.

How many cubic feet are in a cubic yard?

Exactly 27. A yard is 3 feet, and volume cubes that length.

Is a liter exactly 0.001 cubic meters?

Yes. The liter was defined as exactly 0.001 m³ by the CGPM in 1964.

What is a board foot on this page?

A volume of exactly 144 cubic inches, the size of a piece 1 foot by 1 foot by 1 inch. It is not a lumber grade.

Factor sources

  • The liter is exactly 0.001 m³ (CGPM, 1964).
  • A US gallon is exactly 231 cubic inches, published by NIST as 3.785411784 L. US fluid ounces, cups, pints, and quarts are 1/128, 1/16, 1/8, and 1/4 of that gallon.
  • A UK gallon is exactly 4.54609 L (UK Weights and Measures Act 1985). An imperial fluid ounce is 1/160 of that gallon.
  • A board foot is the lumber volume 1 ft × 1 ft × 1 in, exactly 144 cubic inches. It is a volume, not a grade or a price.

Related converters