Unit converters
Pressure Converter
Convert pressure from pascals, bar, atmospheres, psi, and pounds per square foot.
1 psi = 6.894757293168 kPa
Common conversions
These examples use the same factors as the converter. Choose one to fill the fields.
| From | To | Result | Use example |
|---|---|---|---|
| 1 atm | Pascal (Pa) | 101,325 Pa | |
| 1 bar | Kilopascal (kPa) | 100 kPa | |
| 1 psi | Pound per square foot (psf) | 144 psf | |
| 1 psi | Kilopascal (kPa) | 6.89475729 kPa |
Conversion reference
Factors are relative to the pascal. Rounded figures in the result use the decimal-place control.
| Unit | Symbol | Relation |
|---|---|---|
| Pound per square inch (psi) | psi | 1 psi = 6,894.75729316836 Pa |
| Pound per square foot (psf) | psf | 1 psf = 47.880258980336 Pa |
| Pascal (Pa) | Pa | Base unit |
| Kilopascal (kPa) | kPa | 1 kPa = 1,000 Pa |
| Megapascal (MPa) | MPa | 1 MPa = 1,000,000 Pa |
| Bar | bar | 1 bar = 100,000 Pa |
| Standard atmosphere (atm) | atm | 1 atm = 101,325 Pa |
Conversion standards and methodology
Review unit conventions, formula scope, and practical precision limits.
Official metrology standards
- NIST
The International System of Units
U.S. presentation of the SI based on defining constants.
NIST SP 330 (2019)
Public reference. Source record checked 2026-11-17.
- NIST
Guide for the Use of SI
Conversion tables and rounding guidance. This edition predates the 2019 SI redefinition; consult SP 330 and BIPM for current SI definitions.
NIST SP 811 (2008), Appendix B, especially B.7–B.9
Public reference. Source record checked 2026-11-17.
Conversion formulas and constants
How to apply the methodology
Identify the convention
Choose the quantity and confirm the exact input and output unit definitions.
Apply the appropriate relationship
Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.
Review precision and context
Check the result against the input precision, selected convention, and any application-specific rules.
Scale through a common base
b = x × f₁; y = b / f₂
- x
- Input value
- b
- Value in the category's common base unit
- y
- Output value
- f₁, f₂
- Base units per input/output unit
- Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
- Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2Pressure from force per area
1 atm = 101325 Pa; 1 bar = 100000 Pa; 1 psi = [0.45359237 × 9.80665 / (0.0254)²] Pa ≈ 6894.757293168 Pa
- Pa
- Pascal, one newton per square meter
- psi
- Pounds-force per square inch
- atm
- Standard atmosphere
- The psi expression is exact; its finite decimal shown here is approximate.
- Gauge-to-absolute pressure additionally needs the local reference pressure. Standard gravity is 9.80665 m/s² by definition.
- Water- and mercury-column variants depend on the stated convention and may use rounded factors.
LaTeX equation
1\,\mathrm{psi}=\frac{0.45359237\times9.80665}{(0.0254)^2}\,\mathrm{Pa}Precision and rounding rules
- Compute through the category base using unformatted values; round only the displayed result.
- Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
- The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
- NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.
Methodology questions
Can I convert gauge pressure into absolute pressure with a unit factor?
No. Add the appropriate reference pressure in consistent units; a unit conversion alone cannot supply it.
Does an exact definition guarantee every displayed digit is accurate?
No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.
How it works
The pascal is the SI unit of pressure. One bar is exactly 100,000 Pa. One standard atmosphere is exactly 101,325 Pa.
Psi is one pound-force on one square inch. The pound-force uses the 1959 pound and standard gravity, 9.80665 m/s². A pound per square foot is that same force spread over 144 square inches, so 1 psi = 144 psf.
People compare these units for tires, weather, hydraulics, and compressed air. This page does not recommend a pressure. It only converts the number.
Formulas
These conversions multiply by an exact factor of the pascal. The relations below are read from the unit table.
- 1 psi = 6,894.75729316836 Pa
- 1 psf = 47.880258980336 Pa
- Base unit
- 1 kPa = 1,000 Pa
- 1 MPa = 1,000,000 Pa
- 1 bar = 100,000 Pa
- 1 atm = 101,325 Pa
Worked examples
1 atm = 101,325 Pa
1 atm = 101,325 Pa
1 bar = 100 kPa
1 bar = 100 kPa
FAQ
Is 1 psi equal to 144 psf?
Yes. A square foot is 144 square inches, and both units use the same pound-force.
How many pascals are in a bar?
Exactly 100,000 Pa.
How many pascals are in a standard atmosphere?
Exactly 101,325 Pa. That is the standard atmosphere, not a reading from today’s weather.
Does this page tell me the right tire pressure?
No. It converts units of pressure. It does not recommend a pressure for a tire, a tank, or a system.
Factor sources
- One bar is exactly 100,000 Pa. One standard atmosphere is exactly 101,325 Pa.
- One psi is one avoirdupois pound-force per square inch. The pound-force uses the 1959 pound and standard gravity, 9.80665 m/s² exactly. One psf is that force spread over 144 square inches.