Unit converters
Speed Converter
Convert speed between miles per hour, kilometers per hour, meters per second, feet per second, and knots.
1 mph = 1.609344 km/h
Common conversions
These examples use the same factors as the converter. Choose one to fill the fields.
| From | To | Result | Use example |
|---|---|---|---|
| 1 mph | Meter per second (m/s) | 0.44704 m/s | |
| 60 mph | Kilometer per hour (km/h) | 96.56064 km/h | |
| 1 kn | Kilometer per hour (km/h) | 1.852 km/h | |
| 1 m/s | Foot per second (ft/s) | 3.2808399 ft/s |
Conversion reference
Factors are relative to the meter per second. Rounded figures in the result use the decimal-place control.
| Unit | Symbol | Relation |
|---|---|---|
| Mile per hour (mph) | mph | 1 mph = 0.44704 m/s |
| Kilometer per hour (km/h) | km/h | 1 km/h = 0.277777777778 m/s |
| Meter per second (m/s) | m/s | Base unit |
| Foot per second (ft/s) | ft/s | 1 ft/s = 0.3048 m/s |
| Knot (kn) | kn | 1 kn = 0.514444444444 m/s |
Conversion standards and methodology
Review unit conventions, formula scope, and practical precision limits.
Official metrology standards
- NIST
The International System of Units
U.S. presentation of the SI based on defining constants.
NIST SP 330 (2019)
Public reference. Source record checked 2026-11-17.
- ISO
Quantities and units — Space and time
Space and time quantities; review the amendment with the base document.
ISO 80000-3:2019 with Amendment 1:2025
Public catalogue scope; full standard requires licensed access. Source record checked 2026-11-17.
- NIST
Guide for the Use of SI
Conversion tables and rounding guidance. This edition predates the 2019 SI redefinition; consult SP 330 and BIPM for current SI definitions.
NIST SP 811 (2008), Appendix B, especially B.7–B.9
Public reference. Source record checked 2026-11-17.
Conversion formulas and constants
How to apply the methodology
Identify the convention
Choose the quantity and confirm the exact input and output unit definitions.
Apply the appropriate relationship
Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.
Review precision and context
Check the result against the input precision, selected convention, and any application-specific rules.
Scale through a common base
b = x × f₁; y = b / f₂
- x
- Input value
- b
- Value in the category's common base unit
- y
- Output value
- f₁, f₂
- Base units per input/output unit
- Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
- Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2Distance divided by elapsed time
1 mph = 1609.344/3600 m/s = 0.44704 m/s; 1 km/h = 1/3.6 m/s
- mph
- International miles per hour
- m/s
- Meters per second
- km/h
- Kilometers per hour
- A unit conversion does not supply a vehicle speed measurement.
- Keep repeating quotients unrounded during calculation.
LaTeX equation
1\,\mathrm{mph}=\frac{1609.344}{3600}\,\mathrm{m/s}=0.44704\,\mathrm{m/s}Precision and rounding rules
- Compute through the category base using unformatted values; round only the displayed result.
- Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
- The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
- NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.
Methodology questions
Is miles per hour to meters per second exact?
The defining factor 0.44704 is exact for international miles and hours. Software representation and measured input uncertainty remain finite.
Does an exact definition guarantee every displayed digit is accurate?
No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.
How it works
Speed here is a distance divided by an hour or by a second. A mile per hour uses the international mile, 1,609.344 m, divided by 3,600 seconds. A kilometer per hour is 1,000 m per 3,600 seconds.
People use it for driving, running, wind, and boats. A knot is one international nautical mile per hour. The nautical mile is 1,852 m exactly.
The page does not convert pace, such as minutes per mile. That is a time per distance, not a speed.
Formulas
These conversions multiply by an exact factor of the meter per second. The relations below are read from the unit table.
- 1 mph = 0.44704 m/s
- 1 km/h = 0.277777777778 m/s
- Base unit
- 1 ft/s = 0.3048 m/s
- 1 kn = 0.514444444444 m/s
Worked examples
1 mph = 0.44704 m/s
1 mph = 0.44704 m/s
60 mph = 96.56064 km/h
1 mph = 1.609344 km/h
FAQ
How is a mile per hour defined here?
One international mile, 1,609.344 m, per hour. An hour is 3,600 seconds.
What is a knot?
One international nautical mile per hour. The nautical mile is exactly 1,852 m.
Is 1 meter per second equal to 3.6 kilometers per hour?
Yes. One meter per second is 3,600 meters per hour, which is 3.6 km/h.
Does this convert minutes per mile?
No. Minutes per mile is time per distance. This page converts speed only.
Factor sources
- One mile per hour is one international mile (1,609.344 m) per hour, which is 0.44704 m/s.
- One knot is one international nautical mile (1,852 m) per hour.