Numeravo

Numeravo

Smart calculators

Unit converters

Length Converter

Convert length with the international inch, foot, yard, and mile, or enter a feet-and-inches fraction.

Read as 67.375 in

1 ft = 30.48 cm · 1 in = 2.54 cm

Common conversions

These examples use the same factors as the converter. Choose one to fill the fields.

FromToResultUse example
1 inCentimeter (cm)2.54 cm
1 ftMeter (m)0.3048 m
1 ydMeter (m)0.9144 m
1 miKilometer (km)1.609344 km
5' 7-3/8"Inch (in)67.375 in
1 mFoot (ft)3.2808399 ft

Conversion reference

Factors are relative to the meter. Rounded figures in the result use the decimal-place control.

UnitSymbolRelation
Millimeter (mm)mm1 mm = 0.001 m
Centimeter (cm)cm1 cm = 0.01 m
Meter (m)mBase unit
Kilometer (km)km1 km = 1,000 m
Inch (in)in1 in = 0.0254 m
Foot (ft)ft1 ft = 0.3048 m
Yard (yd)yd1 yd = 0.9144 m
Mile (mi)mi1 mi = 1,609.344 m
Feet and inchesft-inInterpreted in inches. 1 in = 0.0254 m

Conversion standards and methodology

Review unit conventions, formula scope, and practical precision limits.

Official metrology standards
  • NIST

    The International System of Units

    U.S. presentation of the SI based on defining constants.

    NIST SP 330 (2019)

    Public reference. Source record checked 2026-11-17.

  • ISO

    Quantities and units — Space and time

    Space and time quantities; review the amendment with the base document.

    ISO 80000-3:2019 with Amendment 1:2025

    Public catalogue scope; full standard requires licensed access. Source record checked 2026-11-17.

  • NIST

    U.S. survey foot

    Legacy survey-foot data retain their original unit metadata; do not silently relabel coordinates.

    Deprecation effective December 31, 2022; international foot used from January 1, 2023

    Public reference. Source record checked 2026-11-17.

  • NIST

    Weighing and measuring devices

    Commercial device requirements and measurement tables. Applicability depends on adoption by the responsible authority.

    NIST Handbook 44 (2026), including Appendix C

    Public reference. Source record checked 2026-11-17.

Conversion formulas and constants

How to apply the methodology

  1. Identify the convention

    Choose the quantity and confirm the exact input and output unit definitions.

  2. Apply the appropriate relationship

    Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.

  3. Review precision and context

    Check the result against the input precision, selected convention, and any application-specific rules.

Scale through a common base

b = x × f₁; y = b / f₂

x
Input value
b
Value in the category's common base unit
y
Output value
f₁, f₂
Base units per input/output unit
  • Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
  • Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2

International length anchors

1 in = 0.0254 m; 1 ft = 0.3048 m; 1 mi = 1609.344 m

in
International inch
ft
International foot
mi
International statute mile
  • These definitions are exact. Survey feet are a separate legacy unit: 1200/3937 m.
  • A length conversion is not a coordinate reference-system transformation.
LaTeX equation
1\,\mathrm{in}=0.0254\,\mathrm{m},\quad 1\,\mathrm{ft}=0.3048\,\mathrm{m},\quad 1\,\mathrm{mi}=1609.344\,\mathrm{m}
Precision and rounding rules
  • Compute through the category base using unformatted values; round only the displayed result.
  • Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
  • The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
  • NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.

Methodology questions

Does this convert survey coordinates?

This tool uses international length units. Coordinate transformations and legacy survey-foot metadata require a separate geospatial workflow.

Does an exact definition guarantee every displayed digit is accurate?

No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.

How it works

Length on this page uses the international yard and pound of 1 July 1959. NIST publishes the inch in that agreement as 0.0254 m exactly. A foot is 12 of those inches, a yard is 3 feet, and a statute mile is 5,280 feet.

People use it for height, room dimensions, fabric, travel distance, and anything else that is a single distance. Feet-and-inches accepts entries such as 5' 7-3/8" and 5 ft 7.375 in. The inch-fraction control rounds a feet-and-inches result to the nearest half, quarter, eighth, sixteenth, thirty-second, or sixty-fourth of an inch.

The mile here is the international mile, 1,609.344 m. It is not the older US survey mile.

Formulas

These conversions multiply by an exact factor of the meter. The relations below are read from the unit table.

  • 1 mm = 0.001 m
  • 1 cm = 0.01 m
  • Base unit
  • 1 km = 1,000 m
  • 1 in = 0.0254 m
  • 1 ft = 0.3048 m
  • 1 yd = 0.9144 m
  • 1 mi = 1,609.344 m
  • Interpreted in inches. 1 in = 0.0254 m

Worked examples

  1. 1 in = 2.54 cm

    1 in = 2.54 cm

  2. 1 ft = 0.3048 m

    1 ft = 0.3048 m

FAQ

Is a foot exactly 12 inches?

Yes. A foot is exactly 12 international inches, and a yard is exactly 3 feet.

Which inch does this converter use?

The international inch, defined as 0.0254 m exactly in the 1959 yard and pound and published by NIST. A centimeter is 0.01 m, so 1 inch is 2.54 cm.

Can I type a height such as 5' 7-3/8"?

Yes, when the unit is feet and inches. The page also accepts 5 ft 7.375 in and 7-3/8".

Is the mile the US survey mile?

No. This page uses the international mile, 1,609.344 m, which is 5,280 international feet.

Factor sources

  • International yard and pound, 1 July 1959 (National Bureau of Standards / NIST): 1 inch = 0.0254 m exactly. A foot is 12 inches, a yard is 3 feet, and a statute mile is 5,280 feet.
  • The mile used here is the international mile, 1,609.344 m, not the older US survey mile.

Related converters