Unit converters
Data Transfer Speed Converter
Convert data rate with bit/s and byte/s kept apart, and with decimal prefixes kept apart from binary prefixes.
1 Mbps = 0.125 MB/s
Common conversions
These examples use the same factors as the converter. Choose one to fill the fields.
| From | To | Result | Use example |
|---|---|---|---|
| 8 bit/s | Byte per second (B/s) | 1 B/s | |
| 1 Mbps | Megabyte per second (MB/s, decimal) | 0.125 MB/s | |
| 1 kbps | Bit per second (bit/s, bps) | 1,000 bit/s | |
| 1 kB/s | Kibibyte per second (KiB/s, binary) | 0.9765625 KiB/s | |
| 1 MiB/s | Megabyte per second (MB/s, decimal) | 1.048576 MB/s | |
| 1 Gbps | Megabyte per second (MB/s, decimal) | 125 MB/s |
Conversion reference
Factors are relative to the bit per second. Rounded figures in the result use the decimal-place control.
| Unit | Symbol | Relation |
|---|---|---|
| Bit per second (bit/s, bps) | bit/s | Base unit |
| Kilobit per second (kbps, decimal) | kbps | 1 kbps = 1,000 bit/s |
| Megabit per second (Mbps, decimal) | Mbps | 1 Mbps = 1,000,000 bit/s |
| Gigabit per second (Gbps, decimal) | Gbps | 1 Gbps = 1,000,000,000 bit/s |
| Byte per second (B/s) | B/s | 1 B/s = 8 bit/s |
| Kilobyte per second (kB/s, decimal) | kB/s | 1 kB/s = 8,000 bit/s |
| Megabyte per second (MB/s, decimal) | MB/s | 1 MB/s = 8,000,000 bit/s |
| Gigabyte per second (GB/s, decimal) | GB/s | 1 GB/s = 8,000,000,000 bit/s |
| Kibibyte per second (KiB/s, binary) | KiB/s | 1 KiB/s = 8,192 bit/s |
| Mebibyte per second (MiB/s, binary) | MiB/s | 1 MiB/s = 8,388,608 bit/s |
| Gibibyte per second (GiB/s, binary) | GiB/s | 1 GiB/s = 8,589,934,592 bit/s |
Conversion standards and methodology
Review unit conventions, formula scope, and practical precision limits.
Official metrology standards
- IEC
Information science and technology
Information quantities and binary prefixes; replaces the 2008 edition.
IEC 80000-13:2025, edition 2
Public catalogue scope; full standard requires licensed access. Source record checked 2026-11-17.
- NIST
Prefixes for binary multiples
Examples distinguish powers of two from SI decimal multiples and bits from bytes. See IEC 80000-13:2025 for the revised prefix set.
NIST reference: Prefixes for binary multiples
Public reference. Source record checked 2026-11-17.
- NIST
The International System of Units
U.S. presentation of the SI based on defining constants.
NIST SP 330 (2019)
Public reference. Source record checked 2026-11-17.
Conversion formulas and constants
How to apply the methodology
Identify the convention
Choose the quantity and confirm the exact input and output unit definitions.
Apply the appropriate relationship
Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.
Review precision and context
Check the result against the input precision, selected convention, and any application-specific rules.
Scale through a common base
b = x × f₁; y = b / f₂
- x
- Input value
- b
- Value in the category's common base unit
- y
- Output value
- f₁, f₂
- Base units per input/output unit
- Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
- Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2Decimal, binary, and bit/byte definitions
1 kB = 1000 B; 1 MB = 1000000 B; 1 KiB = 1024 B; 1 MiB = 1048576 B; 1 B = 8 bit
- B
- Byte (8-bit octet convention)
- bit
- Bit
- kB / MB
- Decimal kilobyte / megabyte
- KiB / MiB
- Binary kibibyte / mebibyte
- Case matters: bytes and bits are different units. Some interfaces use KB for decimal kilobytes; the SI kilo symbol is lowercase k.
- Storage and transfer rates are distinct quantities; bit/s and byte/s include the time denominator.
- Very large integer quantities can exceed JavaScript's exact integer range.
LaTeX equation
1\,\mathrm{KiB}=2^{10}\,\mathrm{B},\quad 1\,\mathrm{MiB}=2^{20}\,\mathrm{B},\quad 1\,\mathrm{MB}=10^6\,\mathrm{B}Precision and rounding rules
- Compute through the category base using unformatted values; round only the displayed result.
- Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
- The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
- NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.
Methodology questions
Is KB always 1024 bytes?
No. SI kilo denotes 1000. KiB explicitly denotes 1024 bytes; check ambiguous legacy KB labels before converting.
Does an exact definition guarantee every displayed digit is accurate?
No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.
How it works
A byte is exactly 8 bits, so a bit per second and a byte per second are different units. Decimal prefixes follow the SI. 1 kbps is 1,000 bit/s, 1 Mbps is 1,000,000 bit/s, and 1 Gbps is 1,000,000,000 bit/s. kB/s, MB/s, and GB/s use those same 1,000 steps on bytes.
Binary prefixes follow IEC 80000-13. 1 KiB/s is 1,024 bytes per second, 1 MiB/s is 1,024² bytes per second, and 1 GiB/s is 1,024³ bytes per second. This page does not treat kB/s as 1,024.
People compare network plans, file copies, and drive speeds. 1 MB/s equals 8 Mbps, because both the mega prefix and the byte are exact. 1 KiB/s equals 1.024 kB/s.
Formulas
These conversions multiply by an exact factor of the bit per second. The relations below are read from the unit table.
- Base unit
- 1 kbps = 1,000 bit/s
- 1 Mbps = 1,000,000 bit/s
- 1 Gbps = 1,000,000,000 bit/s
- 1 B/s = 8 bit/s
- 1 kB/s = 8,000 bit/s
- 1 MB/s = 8,000,000 bit/s
- 1 GB/s = 8,000,000,000 bit/s
- 1 KiB/s = 8,192 bit/s
- 1 MiB/s = 8,388,608 bit/s
- 1 GiB/s = 8,589,934,592 bit/s
Worked examples
8 bit/s = 1 B/s
1 bit/s = 0.125 B/s
1 Mbps = 0.125 MB/s
1 Mbps = 0.125 MB/s
FAQ
Is kbps the same as kB/s?
No. kbps is 1,000 bits per second. kB/s is 1,000 bytes per second. A byte is 8 bits, so 1 kB/s = 8 kbps.
Is a kilobyte per second 1,024 bytes per second?
Not on this page. kB/s is 1,000 bytes per second. KiB/s is 1,024 bytes per second. MB/s and GB/s step by 1,000. MiB/s and GiB/s step by 1,024.
Why is 1 Mbps equal to 0.125 MB/s?
1 Mbps is 1,000,000 bit/s. Dividing by 8 gives 125,000 B/s. 1 MB/s is 1,000,000 B/s, so 125,000 B/s is 0.125 MB/s.
Which unit matches a label that says MB/s?
MB/s on this page is 1,000,000 bytes per second. MiB/s is 1,048,576 bytes per second. The unit label says decimal or binary.
Factor sources
- One byte is 8 bits.
- Decimal prefixes follow the SI. 1 kbps = 1,000 bit/s, 1 Mbps = 1,000² bit/s, and 1 Gbps = 1,000³ bit/s. 1 kB/s = 1,000 B/s, 1 MB/s = 1,000² B/s, and 1 GB/s = 1,000³ B/s.
- Binary prefixes follow IEC 80000-13. 1 KiB/s = 1,024 B/s, 1 MiB/s = 1,024² B/s, and 1 GiB/s = 1,024³ B/s.