Unit converters
Slope / Grade Converter
Convert slope from the angle above horizontal. Percent, rise:run, and inches per foot follow the tangent, so a vertical slope stays undefined.
Read as rise/run = 0.08333333 (1:12).
percent grade = rise/run × 100
Enter rise:run as 1:12. Zero is level. 90°, and a ratio such as 1:0, are vertical and have no finite percent grade, rise:run, or inches per foot.
Common conversions
These examples use the same factors as the converter. Choose one to fill the fields.
| From | To | Result | Use example |
|---|---|---|---|
| 1:12 | Percent grade (%) | 8.33333333 % | |
| 1:12 | Inches per foot (in/ft) | 1 in/ft | |
| 1:12 | Degree (°) | 4.76364169 ° | |
| 45 ° | Percent grade (%) | 100 % | |
| 0 ° | Inches per foot (in/ft) | 0 in/ft | |
| 10 % | Degree (°) | 5.71059314 ° |
Conversion reference
Percent grade, rise:run, and inches per foot are the tangent of the angle from horizontal. They are not a fixed multiplier. Rounded figures in the result use the decimal-place control.
| Unit | Symbol | Relation |
|---|---|---|
| Percent grade (%) | % | % grade = 100 × rise/run = 100 × tan(angle) |
| Degree (°) | ° | Angle from horizontal. Percent, rise:run, and inches per foot use the tangent of this angle. |
| Radian (rad) | rad | 1 rad = 57.295779513082 ° |
| Rise:run ratio | rise:run | rise/run = tan(angle). A ratio such as 1:12 is one unit of rise for twelve of run. |
| Inches per foot (in/ft) | in/ft | in/ft = 12 × rise/run = 12 × tan(angle) |
How it works
A slope is the angle a line makes with horizontal. Percent grade is 100 times rise/run. Inches per foot are the rise over a 12-inch run. A rise:run entry such as 1:12 means one unit of rise for twelve units of run.
These are trigonometric, not a fixed multiplier. A 1:12 slope is 1 inch per foot and 8.333…% grade. 45° is a 100% grade, a 1:1 rise:run, and 12 inches per foot, because the tangent of 45° is 1.
Zero is level: 0°, 0%, 0 in/ft, and 0:1. A vertical angle, 90° or a ratio with no run such as 1:0, has no finite percent grade, rise:run, or inches per foot. The tangent repeats every 180°, so an angle outside −90° to 90° matches the equivalent slope inside that range.
People compare road grades, ramps, and roof pitches. This page only converts the slope. It does not lay out a roof or check a code. The roof pitch calculator linked here also estimates area and rafter length.
Formulas
Percent grade, rise/run, and inches per foot follow the tangent of the angle from horizontal. The relations below are read from the unit table.
- % grade = 100 × rise/run = 100 × tan(angle)
- Angle from horizontal. Percent, rise:run, and inches per foot use the tangent of this angle.
- 1 rad = 57.295779513082 °
- rise/run = tan(angle). A ratio such as 1:12 is one unit of rise for twelve of run.
- in/ft = 12 × rise/run = 12 × tan(angle)
Worked examples
1:12 = 8.33333333 %
percent grade = rise/run × 100
1:12 = 1 in/ft
inches per foot = rise/run × 12
FAQ
Is 45 degrees a 100% grade?
Yes. The tangent of 45° is 1, and percent grade is 100 times the tangent, so 45° is a 100% grade and a 1:1 rise:run.
Is a 1:12 slope one inch per foot?
Yes. One unit of rise for twelve units of run is 1 inch of rise for 12 inches of run, which is 1 inch per foot and 8.333…% grade.
What does the converter do with 90 degrees?
It reports that a vertical slope has no finite percent grade, rise:run, or inches per foot. A ratio with a run of 0, such as 1:0, is the same case.
Can a grade be negative?
Yes. A negative percent, angle, or rise is the same slope running downhill. Zero is level.
Does this page design a roof?
No. It converts slope units. It does not calculate rafter length, roof area, or a code limit. The roof pitch calculator linked on this page is the project tool.
Factor sources
- Percent grade = 100 × tan(angle). Inches per foot = 12 × tan(angle). A rise:run ratio is the tangent itself: 1:12 means rise/run = 1/12.
- 0° is a level slope. 90° is vertical, where the tangent is undefined. Negative values are downhill slopes.
Related calculators
These calculators estimate a project. This page only converts units.