Numeravo

Numeravo

Smart calculators

Unit converters

Cooking Measurement Converter

Convert cooking volume. US and imperial units stay separate, and this page does not convert volume to weight.

1 US cup = 236.5882365 mL

Volume only. US and imperial units are labeled separately. The imperial cup is 10 imperial fluid ounces, half an imperial pint; the United Kingdom does not define a statutory cup. Volume is not converted to weight.

Common conversions

These examples use the same factors as the converter. Choose one to fill the fields.

FromToResultUse example
1 US cupMilliliter (mL)236.5882365 mL
1 US tbspUS teaspoon (1/6 US fl oz)3 US tsp
1 US galLiter (L)3.78541178 L
1 imp galLiter (L)4.54609 L
1 imp ptMilliliter (mL)568.26125 mL
1 US fl ozImperial fluid ounce1.04084273 imp fl oz

Conversion reference

Factors are relative to the liter. Rounded figures in the result use the decimal-place control.

UnitSymbolRelation
US teaspoon (1/6 US fl oz)US tsp1 US tsp = 0.004928921594 L
US tablespoon (1/2 US fl oz)US tbsp1 US tbsp = 0.014786764781 L
US fluid ounceUS fl oz1 US fl oz = 0.029573529563 L
US cup (8 US fl oz)US cup1 US cup = 0.2365882365 L
US pintUS pt1 US pt = 0.473176473 L
US quartUS qt1 US qt = 0.946352946 L
US gallonUS gal1 US gal = 3.785411784 L
Milliliter (mL)mL1 mL = 0.001 L
Liter (L)LBase unit
Imperial fluid ounceimp fl oz1 imp fl oz = 0.0284130625 L
Imperial cup (10 imp fl oz)imp cup1 imp cup = 0.284130625 L
Imperial pintimp pt1 imp pt = 0.56826125 L
Imperial quartimp qt1 imp qt = 1.1365225 L
Imperial gallonimp gal1 imp gal = 4.54609 L

Conversion standards and methodology

Review unit conventions, formula scope, and practical precision limits.

Official metrology standards
  • FDA

    Household measures for nutrition labeling

    Labeling equivalents include 240 mL per cup, 15 mL per tablespoon, and 5 mL per teaspoon.

    21 CFR § 101.9(b)(5)(viii); FDA household-measure guidance

    Public FDA guidance; current eCFR access was restricted during review. Source record checked 2026-11-17.

  • NIST

    Weighing and measuring devices

    Commercial device requirements and measurement tables. Applicability depends on adoption by the responsible authority.

    NIST Handbook 44 (2026), including Appendix C

    Public reference. Source record checked 2026-11-17.

  • NIST

    Uniform laws and regulations

    Model labeling provisions; determine local adoption and product-specific requirements.

    NIST Handbook 130 (2026), IV.A, Uniform Packaging and Labeling Regulation

    Public reference. Source record checked 2026-11-17.

  • NIST

    The International System of Units

    U.S. presentation of the SI based on defining constants.

    NIST SP 330 (2019)

    Public reference. Source record checked 2026-11-17.

  • NIST

    Guide for the Use of SI

    Conversion tables and rounding guidance. This edition predates the 2019 SI redefinition; consult SP 330 and BIPM for current SI definitions.

    NIST SP 811 (2008), Appendix B, especially B.7–B.9

    Public reference. Source record checked 2026-11-17.

Conversion formulas and constants

How to apply the methodology

  1. Identify the convention

    Choose the quantity and confirm the exact input and output unit definitions.

  2. Apply the appropriate relationship

    Use the stated factors, offsets, or rate methodology. Keep unrounded intermediate values.

  3. Review precision and context

    Check the result against the input precision, selected convention, and any application-specific rules.

Scale through a common base

b = x × f₁; y = b / f₂

x
Input value
b
Value in the category's common base unit
y
Output value
f₁, f₂
Base units per input/output unit
  • Convert within the same physical quantity. The common base may be a practical unit such as liters or bytes.
  • Keep the unformatted result through both steps; format for display at the end.
LaTeX equation
b=xf_1,\qquad y=b/f_2

Liquid volume definitions

1 US gal = 231 in³ = 3.785411784 L; 1 imp gal = 4.54609 L; 1 L = 0.001 m³

L
Liter
US gal
U.S. liquid gallon
imp gal
Imperial gallon
  • These relationships are exact. U.S. dry measures are separate units.
  • Cube a length factor when converting cubic units.
LaTeX equation
1\,\mathrm{gal}_{US}=231\,\mathrm{in}^3=3.785411784\,\mathrm{L},\quad 1\,\mathrm{gal}_{imp}=4.54609\,\mathrm{L}

Customary volume versus labeling equivalents

1 US cup = 3.785411784/16 L = 236.5882365 mL; FDA labeling cup = 240 mL

US cup
Eight U.S. liquid fluid ounces
FDA cup
Nutrition-labeling equivalent, not a general metric-cup definition
  • The existing cooking tool uses U.S. customary and imperial volume units, not FDA labeling equivalents.
  • FDA labeling tablespoon = 15 mL and teaspoon = 5 mL. These differ from customary gallon-derived measures.
  • Ingredient mass requires an ingredient-specific density and preparation convention; this tool converts volume only.
LaTeX equation
V_{\mathrm{cup,US}}=\frac{3.785411784}{16}\,\mathrm{L}=236.5882365\,\mathrm{mL}
Precision and rounding rules
  • Compute through the category base using unformatted values; round only the displayed result.
  • Exact definitions do not guarantee exact binary floating-point arithmetic or increase the precision of a measured input.
  • The current converter formatter normalizes to 15 significant decimal digits and rounds ties away from zero. Its displayed precision is not a measurement uncertainty.
  • NIST SP 811 B.7 describes ties-to-even. That reference rule differs from the current UI formatter; no NIST rounding certification is claimed.

Methodology questions

Is a 240 mL cup the same as this tool's U.S. cup?

No. FDA uses 240 mL for nutrition labeling. The tool's customary U.S. cup is exactly 236.5882365 mL.

Does an exact definition guarantee every displayed digit is accurate?

No. Exact unit definitions coexist with finite software arithmetic and uncertain input measurements. Display formatting is separate from measurement uncertainty.

How it works

Every unit on this page is a volume. A US gallon is exactly 231 cubic inches, published by NIST as 3.785411784 L. A US teaspoon is 1/6 of a US fluid ounce, and a US tablespoon is 1/2 of a US fluid ounce, which is three teaspoons. A US cup is 8 US fluid ounces, a US pint is 2 cups, a US quart is 2 pints, and a US gallon is 4 quarts.

An imperial gallon is exactly 4.54609 L under the UK Weights and Measures Act 1985. An imperial pint is 1/8 of that gallon, and an imperial fluid ounce is 1/160 of it. The imperial cup here is 10 imperial fluid ounces, half an imperial pint. The United Kingdom does not define a statutory cup.

A US teaspoon is 4.92892159375 mL, not 5 mL. The page does not convert a cup of flour, butter, or any other ingredient to grams. That step needs a density, and none is applied.

Formulas

These conversions multiply by an exact factor of the liter. The relations below are read from the unit table.

  • 1 US tsp = 0.004928921594 L
  • 1 US tbsp = 0.014786764781 L
  • 1 US fl oz = 0.029573529563 L
  • 1 US cup = 0.2365882365 L
  • 1 US pt = 0.473176473 L
  • 1 US qt = 0.946352946 L
  • 1 US gal = 3.785411784 L
  • 1 mL = 0.001 L
  • Base unit
  • 1 imp fl oz = 0.0284130625 L
  • 1 imp cup = 0.284130625 L
  • 1 imp pt = 0.56826125 L
  • 1 imp qt = 1.1365225 L
  • 1 imp gal = 4.54609 L

Worked examples

  1. 1 US cup = 236.5882365 mL

    1 US cup = 236.5882365 mL

  2. 1 US tbsp = 3 US tsp

    1 US tbsp = 3 US tsp

FAQ

Is a US cup the same as an imperial cup?

No. A US cup is 8 US fluid ounces, 236.5882365 mL. The imperial cup on this page is 10 imperial fluid ounces, half an imperial pint. The United Kingdom does not define a statutory cup.

Is a US teaspoon 5 mL?

No. A US teaspoon is 1/6 of a US fluid ounce, which is 4.92892159375 mL. A US tablespoon is three of those teaspoons, 14.78676478125 mL. Enter milliliters when the measure you want is exactly 5 mL.

Are US and imperial fluid ounces the same?

No. A US fluid ounce is 1/128 of a US gallon. An imperial fluid ounce is 1/160 of an imperial gallon, 28.4130625 mL. The labels keep them apart.

Why is there no cups-to-grams conversion?

A cup of flour and a cup of water do not have the same mass. That conversion needs a density for the ingredient. This page does not apply one.

How many milliliters are in one US gallon?

3,785.411784 mL. The US gallon on this page is the NIST value 3.785411784 L. The UK gallon is 4.54609 L.

Factor sources

  • A US gallon is exactly 231 cubic inches, published by NIST as 3.785411784 L. A US fluid ounce is 1/128 of that gallon, a US cup is 8 US fluid ounces, a US pint is 1/8 gallon, and a US quart is 1/4 gallon.
  • NIST SP 430 gives the kitchen ratios as exact: 1 teaspoon = 1/6 US fluid ounce and 1 tablespoon = 1/2 US fluid ounce. Three teaspoons equal one tablespoon.
  • A UK gallon is exactly 4.54609 L (UK Weights and Measures Act 1985). An imperial pint is 1/8 of that gallon and an imperial fluid ounce is 1/160 of it.
  • The liter is exactly 0.001 m³, and a milliliter is 0.001 L. No ingredient density is used.

Related converters