Numeravo

Numeravo

Smart calculators

Steel reference

Schedule 40 vs. Schedule 80

What you need to know

A schedule identifies a pipe wall-thickness series. Read it together with the nominal pipe size and the applicable dimensional standard.

Applies to US steel-product terminology and document reading. Verify the specification and edition used for your project.

Start with the complete pipe description

Record NPS or DN, schedule, material specification and edition, grade, coating, ends, length, and quantity. ASME B36.10M covers dimensions of welded and seamless wrought steel pipe. A purchase description needs the applicable product specification as well.

Compare a matching size

A useful comparison holds nominal size and dimensional standard constant, then checks outside diameter, nominal wall, inside diameter, and published weight in the authorized table. Comparing schedules across different nominal sizes mixes two variables.

Documents to collect

Keep the approved pipe description, the specified dimension table, supplier submittal, and material certificate together. Resolve mismatched descriptions through the purchaser and responsible designer before ordering.

Common errors

A schedule number alone does not establish the allowable pressure of a piping system. Service conditions, material, joints, components, and the governing design requirements require a separate evaluation. This guide provides document-reading guidance; it supplies no pressure or wall-thickness selection table.

Reference checklist

Records to compare before using a value
RecordWhat to verify
Product identificationMaterial specification, grade, shape, size, and units
SourcePublisher, document designation, edition, and table or section
ApplicationOrdering, measurement, calculation, or project acceptance

Questions and answers

Does Schedule 80 mean 80 psi?

No. A schedule is a dimensional designation. Obtain the application-specific pressure evaluation for the complete system.

Where do I find the actual dimensions?

Use the specified dimensional standard or a matching producer document, including its edition and size range. Record the source beside the dimensions.

Sources and further reading

ASME reference

B36.10M-2018 public product description; full dimension tables not accessed. Public page checked November 17, 2026. Source scope and terminology reviewed. Project-specific engineering and acceptance remain with the responsible professional.

Related references

Report a correction

Email contact@numeravo.com

Include the page title, issue, and an optional source.

Related calculators

Use these tools for the measurement tasks described below. Verify the product designation and project requirements before applying a converted value.