Steel reference
Round, Square, and Rectangular HSS Dimensions
What you need to know
Read HSS records as a combination of shape, outside dimensions, wall designation, and material specification.
Applies to US steel-product terminology and document reading. Verify the specification and edition used for your project.
Read the shape first
Round, square, and rectangular HSS have different geometric descriptions. Record diameter for a round section, or both outside side dimensions for a rectangular section, and preserve the units and wall designation.
Use the matching property source
STI identifies resources for geometric properties and producer capability. Match the property table to the material specification and edition. Rounded corners affect rectangular and square section geometry, so a sharp-corner box model needs its approximation stated.
Build a receiving checklist
Keep a copy of the ordered designation, specification, grade, required length, and certificate reference. Compare the supplied identification with the order. Escalate a difference before treating a dimensionally similar member as an acceptable substitution.
Common errors
A section designation does not establish a member's installed capacity or connection adequacy. Verify availability with the producer for the actual order. This guide supplies terminology and document checks; it does not select members.
Reference checklist
| Record | What to verify |
|---|---|
| Product identification | Material specification, grade, shape, size, and units |
| Source | Publisher, document designation, edition, and table or section |
| Application | Ordering, measurement, calculation, or project acceptance |
Questions and answers
Can I treat every hollow steel product as HSS?
Use the product's documented specification and intended application to identify it. A similar outline alone is insufficient.
Can a rectangular outline give me exact section properties?
The corner geometry and property-table assumptions matter. Use the documented section properties for the matching product.
Sources and further reading
Steel Tube Institute reference
August 2022 article, overview table updated February 9, 2024. Public page checked November 17, 2026. Source scope and terminology reviewed. Project-specific engineering and acceptance remain with the responsible professional.
Related references
Report a correction
Include the page title, issue, and an optional source.
Related calculators
Use these tools for the measurement tasks described below. Verify the product designation and project requirements before applying a converted value.
- Length Converter →
Convert measured lengths between fractional inches, feet, and metric units.