Measurement reference
Fractional inches, decimals, and millimeters
What you need to know
One international inch equals exactly 25.4 millimeters. Divide a fraction's numerator by its denominator to get decimal inches, then multiply by 25.4 to get millimeters.
This reference converts physical lengths. Product designations and specified manufacturing tolerances need their own reference.
Conversion table
| Fractional inches | Decimal inches | Millimeters |
|---|---|---|
| 1/64 | 0.015625 | 0.396875 |
| 1/32 | 0.031250 | 0.793750 |
| 3/64 | 0.046875 | 1.190625 |
| 1/16 | 0.062500 | 1.587500 |
| 5/64 | 0.078125 | 1.984375 |
| 3/32 | 0.093750 | 2.381250 |
| 7/64 | 0.109375 | 2.778125 |
| 1/8 | 0.125000 | 3.175000 |
| 9/64 | 0.140625 | 3.571875 |
| 5/32 | 0.156250 | 3.968750 |
| 11/64 | 0.171875 | 4.365625 |
| 3/16 | 0.187500 | 4.762500 |
| 13/64 | 0.203125 | 5.159375 |
| 7/32 | 0.218750 | 5.556250 |
| 15/64 | 0.234375 | 5.953125 |
| 1/4 | 0.250000 | 6.350000 |
| 17/64 | 0.265625 | 6.746875 |
| 9/32 | 0.281250 | 7.143750 |
| 19/64 | 0.296875 | 7.540625 |
| 5/16 | 0.312500 | 7.937500 |
| 21/64 | 0.328125 | 8.334375 |
| 11/32 | 0.343750 | 8.731250 |
| 23/64 | 0.359375 | 9.128125 |
| 3/8 | 0.375000 | 9.525000 |
| 25/64 | 0.390625 | 9.921875 |
| 13/32 | 0.406250 | 10.318750 |
| 27/64 | 0.421875 | 10.715625 |
| 7/16 | 0.437500 | 11.112500 |
| 29/64 | 0.453125 | 11.509375 |
| 15/32 | 0.468750 | 11.906250 |
| 31/64 | 0.484375 | 12.303125 |
| 1/2 | 0.500000 | 12.700000 |
| 33/64 | 0.515625 | 13.096875 |
| 17/32 | 0.531250 | 13.493750 |
| 35/64 | 0.546875 | 13.890625 |
| 9/16 | 0.562500 | 14.287500 |
| 37/64 | 0.578125 | 14.684375 |
| 19/32 | 0.593750 | 15.081250 |
| 39/64 | 0.609375 | 15.478125 |
| 5/8 | 0.625000 | 15.875000 |
| 41/64 | 0.640625 | 16.271875 |
| 21/32 | 0.656250 | 16.668750 |
| 43/64 | 0.671875 | 17.065625 |
| 11/16 | 0.687500 | 17.462500 |
| 45/64 | 0.703125 | 17.859375 |
| 23/32 | 0.718750 | 18.256250 |
| 47/64 | 0.734375 | 18.653125 |
| 3/4 | 0.750000 | 19.050000 |
| 49/64 | 0.765625 | 19.446875 |
| 25/32 | 0.781250 | 19.843750 |
| 51/64 | 0.796875 | 20.240625 |
| 13/16 | 0.812500 | 20.637500 |
| 53/64 | 0.828125 | 21.034375 |
| 27/32 | 0.843750 | 21.431250 |
| 55/64 | 0.859375 | 21.828125 |
| 7/8 | 0.875000 | 22.225000 |
| 57/64 | 0.890625 | 22.621875 |
| 29/32 | 0.906250 | 23.018750 |
| 59/64 | 0.921875 | 23.415625 |
| 15/16 | 0.937500 | 23.812500 |
| 61/64 | 0.953125 | 24.209375 |
| 31/32 | 0.968750 | 24.606250 |
| 63/64 | 0.984375 | 25.003125 |
| 1 | 1.000000 | 25.400000 |
Formula and worked examples
Millimeters = inches × 25.4. Inches = millimeters ÷ 25.4.
31/64 inch = 0.484375 inch = 12.303125 mm. 53/64 inch = 0.828125 inch = 21.034375 mm.
For a mixed number, add the whole inches before converting. Five feet six inches equals 66 inches, or 1676.4 mm.
These rows are calculated from exact fractions. Rounding a displayed result does not change a specified tolerance or authorize a nominal product substitution.
Questions and answers
Is a nearby metric size interchangeable?
Numerical proximity alone does not establish fit, tolerance, thread compatibility, or product equivalence. Use the specified dimensions and tolerances.
Does converting a nominal pipe size give its measured diameter?
Convert a physical dimension after identifying it. A nominal designation requires its matching product reference.
Sources and further reading
NIST Guide to the SI, Appendix B.8 conversion factors
Checked November 17, 2026. The table is independently calculated, revision 1. Its values apply to international inches.